Picture of Imco 61091 Dia 1 Sh 1.00 Loc 3.2500 Oal6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

Imco 61091 Dia 1 Sh 1.00 Loc 3.2500 Oal6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

Part Number: IMC61091

Need Assistance or Service? Please call 262-251-4020

Manufacturer: IMCO
SKU: 1002114
Vendor: Sussex Tool and Supply
$651.53

IMCO high helix carbide end mill uncoated square flute single end standard flute cylindrical connection. Made in USA, cylindrical machine side connection. Carbide tool material, standard flute, single end. Shipping state OHIO.

Key Details

Materials & Finish

  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL1.0000

Grades & Coatings

  • Alternate Description: IMCO High Helix End Mill Carbide Uncoated Square Sharp Standard Flute Flutes 3 Single End Streaker Mill

Other Details

  • Brand: IMCO
  • Shipping State: OHIO
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with high helix design. Performs standard flute operations. Suitable for square sharp end milling tasks.

Composition

Carbide, uncoated, cylindrical connection, 1.00 diameter, 3.2500 length, 6.00 overall length.

Typical Uses

End milling in machine toolpost. Used in standard flute operations. Applied in square sharp streaker milling tasks.

Products specifications
Attribute name Attribute value
Shipping State OHIO
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL1.0000
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 6.0000 152.40MM
Shank Or Pilot Diameter 1.0000 25.40MM
Family Group Streaker Mill
Coolant Thru Non Coolant
Mach Side Connection Size 1.0000 25.40MM
Tool Diameter 1.0000 25.40MM
Flutes Or Inserts 3
Length Type Standard
Performance Rating High Performance
Length Of Cut 3.2500 82.55MM
End Of Tool Shape Square
Cutter Style Carbide Finisher
Single Or Double End Single End
Inch Or Metric Inch
Helix Angle 45°
Center Cutting Center Cutting
Only registered users can write reviews