Picture of Imco 61049 Dia 1/2 Sh 0.50 Loc 1.00 Oal3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Noseball Streaker Mill

Imco 61049 Dia 1/2 Sh 0.50 Loc 1.00 Oal3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Noseball Streaker Mill

Part Number: IMC61049

Need Assistance or Service? Please call 262-251-4020

Manufacturer: IMCO
SKU: 1003032
Vendor: Sussex Tool and Supply
$131.84

IMCO high helix carbide uncoated end mill with standard flute and single end ball nose design. Made in USA with cylindrical 0.5000 connection. Toolpost cylindrical connection. Standard flute ball nose end mill.

Key Details

Materials & Finish

  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL0.5000

Grades & Coatings

  • Alternate Description: IMCO High Helix End Mill Carbide Uncoated Ball Nose Ball Standard Flute Flutes 3 Single End Streaker Mill

Other Details

  • Brand: IMCO
  • Shipping State: OHIO
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with high helix design. Performs standard flute operations. Suitable for ball nose and streaker milling tasks.

Composition

Carbide, uncoated, cylindrical connection, 0.50 shank, 1.00 loc, 3.00 oal.

Typical Uses

Ball nose milling, streaker milling, standard flute cutting in machine toolpost.

Products specifications
Attribute name Attribute value
Shipping State OHIO
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.5000
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 3.0000 76.20MM
Shank Or Pilot Diameter 0.5000 12.70MM - 1/2
Family Group Streaker Mill
Coolant Thru Non Coolant
Mach Side Connection Size 0.5000 12.70MM - 1/2
Tool Diameter 0.5000 12.70MM - 1/2
Flutes Or Inserts 3
Length Type Standard
Performance Rating High Performance
Length Of Cut 1.0000 25.40MM
End Of Tool Shape Ball Nose
Cutter Style Carbide Ball Finisher
Single Or Double End Single End
Inch Or Metric Inch
Helix Angle 45°
Center Cutting Center Cutting
Only registered users can write reviews