Picture of Imco 61043 Dia 1/2 Sh 0.50 Loc 0.6250 Oal3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius0.1250 3.18mm Streaker Mill

Imco 61043 Dia 1/2 Sh 0.50 Loc 0.6250 Oal3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius0.1250 3.18mm Streaker Mill

Part Number: IMC61043

Need Assistance or Service? Please call 262-251-4020

Manufacturer: IMCO
SKU: 1003088
Vendor: Sussex Tool and Supply
$119.57

IMCO high helix carbide end mill with uncoated surface. Standard flute three flutes single end corner radius 0.1250. Stalk 3.18mm cylindrical 0.5000 machine post connection. Made in USA.

Key Details

Materials & Finish

  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL0.5000

Grades & Coatings

  • Alternate Description: IMCO High Helix End Mill Carbide Uncoated Corner Radius 0.1250 3.18MM Standard Flute Flutes 3 Single End Streaker Mill

Other Details

  • Brand: IMCO
  • Shipping State: OHIO
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with high helix design. Performs standard flute cutting. Used for end milling operations.

Composition

Carbide, uncoated, cylindrical connection.

Typical Uses

End milling, corner radius cutting, streaker milling in machine tools.

Products specifications
Attribute name Attribute value
Shipping State OHIO
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.5000
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 3.0000 76.20MM
Shank Or Pilot Diameter 0.5000 12.70MM - 1/2
Family Group Streaker Mill
Coolant Thru Non Coolant
Mach Side Connection Size 0.5000 12.70MM - 1/2
Tool Diameter 0.5000 12.70MM - 1/2
Flutes Or Inserts 3
Length Type Standard
Performance Rating High Performance
Length Of Cut 0.6250 15.88MM
End Of Tool Shape Corner Radius
Cutter Style Carbide Bull Nose Finisher
Single Or Double End Single End
Corner Radius 0.1250 3.18MM
Inch Or Metric Inch
Helix Angle 45°
Center Cutting Center Cutting
Only registered users can write reviews