Picture of Imco 61015 Dia 1/4 Sh 0.2500 Loc 0.7500 Oal2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Noseball Streaker Mill

Imco 61015 Dia 1/4 Sh 0.2500 Loc 0.7500 Oal2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Noseball Streaker Mill

Part Number: IMC61015

Need Assistance or Service? Please call 262-251-4020

Manufacturer: IMCO
SKU: 1003343
Vendor: Sussex Tool and Supply
$61.88

IMCO high helix carbide end mill with cylindrical 0.2500 connection and 0.7500 location. Made in USA. Machine side connection type cylindrical. Tool material carbide.

Key Details

Materials & Finish

  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL0.2500

Grades & Coatings

  • Alternate Description: IMCO High Helix End Mill Carbide Uncoated Ball Nose Ball Standard Flute Flutes 3 Single End Streaker Mill

Other Details

  • Brand: IMCO
  • Shipping State: OHIO
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with high helix design. Performs ball nose shaping on workpieces. Suitable for standard flute operations.

Composition

Carbide, uncoated, cylindrical connection, 0.2500 diameter.

Typical Uses

End milling, ball nose shaping, standard flute cutting in machine toolpost.

Products specifications
Attribute name Attribute value
Shipping State OHIO
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.2500
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 2.5000 63.50MM
Shank Or Pilot Diameter 0.2500 6.35MM - 1/4 - E
Family Group Streaker Mill
Coolant Thru Non Coolant
Mach Side Connection Size 0.2500 6.35MM - 1/4 - E
Tool Diameter 0.2500 6.35MM - 1/4 - E
Flutes Or Inserts 3
Length Type Standard
Performance Rating High Performance
Length Of Cut 0.7500 19.05MM
End Of Tool Shape Ball Nose
Cutter Style Carbide Ball Finisher
Single Or Double End Single End
Inch Or Metric Inch
Helix Angle 45°
Center Cutting Center Cutting
Only registered users can write reviews