Picture of Imco 33125 Dia 3/4 Sh 0.7500 Loc 1.00 Oal5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

Imco 33125 Dia 3/4 Sh 0.7500 Loc 1.00 Oal5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp Streaker Mill

Part Number: IMC33125

Need Assistance or Service? Please call 262-251-4020

Manufacturer: IMCO
SKU: 1003173
Vendor: Sussex Tool and Supply
$375.49

IMCO high helix carbide uncoated end mill with standard flute square sharp single end cylindrical 0.7500 toolpost connection. Made in USA, cylindrical 0.7500 toolpost connection. Carbide tool material, standard flute, square sharp. IMCO high helix end mill, single end streaker mill.

Key Details

Materials & Finish

  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Cylindrical
  • Machine Side (Toolpost): CYLINDRICAL0.7500

Grades & Coatings

  • Alternate Description: IMCO High Helix End Mill Carbide Uncoated Square Sharp Standard Flute Flutes 3 Single End Streaker Mill

Other Details

  • Brand: IMCO
  • Shipping State: OHIO
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with high helix design. Performs standard flute operations. Used in milling tasks with square sharp edge.

Composition

Carbide, uncoated, cylindrical, 0.7500 diameter, 1.00 location, 5.00 OAL

Typical Uses

Milling operations, toolpost connection, square sharp cutting, standard flute tasks

Products specifications
Attribute name Attribute value
Shipping State OHIO
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.7500
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 5.0000 127.00MM
Shank Or Pilot Diameter 0.7500 19.05MM - 3/4
Family Group Streaker Mill
Coolant Thru Non Coolant
Mach Side Connection Size 0.7500 19.05MM - 3/4
Tool Diameter 0.7500 19.05MM - 3/4
Flutes Or Inserts 3
Length Type Standard / With Neck
Performance Rating High Performance
Length Of Cut 1.0000 25.40MM
End Of Tool Shape Square
Cutter Style Carbide Finisher
Single Or Double End Single End
Inch Or Metric Inch
Helix Angle 45°
Center Cutting Center Cutting
Neck Length 2.2500 57.15MM
Only registered users can write reviews