Picture of Gorilla Mill Gmkd34Cs5 Dia 3/4" Sh 0.7500 Loc 1.00 Oal 4.00 End Mill Carbide Tialn Single End 45.0° Chamfer Knuckle Dragger

Gorilla Mill Gmkd34Cs5 Dia 3/4" Sh 0.7500 Loc 1.00 Oal 4.00 End Mill Carbide Tialn Single End 45.0° Chamfer Knuckle Dragger

Part Number: GOR50076

Need Assistance or Service? Please call 262-251-4020

Manufacturer: GORILLA MILL
SKU: 1002286
Vendor: Sussex Tool and Supply
$227.20

Carbide TiAlN end mill with 3/4 inch shank. 0.7500 loc, 1.00 oal, 4.00 weldon connection. 45 degree chamfer, knuckle dragger. Made in USA, Weldon connection.

Key Details

Materials & Finish

  • Coating: TiAlN
  • Tool Material: Carbide

Thread & Fittings

  • Machine Side (Toolpost) Connection Type: Weldon
  • Machine Side (Toolpost): WELDON0.7500

Grades & Coatings

  • Alternate Description: GORILLA MILL 50076 DIA 3/4" SH 0.7500 LOC 1.00 OAL 4.00 End Mill Carbide TiAlN Single End 45.0° ChamferChamfer KNUCKLE DRAGGER GMKD34CS5

Other Details

  • Brand: GORILLA MILL
  • Shipping State: WISCONSIN
  • Made In Usa: Yes

Technical Overview

What It Does

Cuts material with a 45.0° chamfer. Designed for knuckle dragger operations. Functions as a single-end end mill.

Composition

Carbide, TiAlN coating, Weldon connection, 3/4" diameter, 0.7500 shank, 1.00 loc, 4.00 oal.

Typical Uses

Used in knuckle dragger tasks. Operates on machine toolpost with Weldon connection. Suitable for end milling with chamfered edges.

Products specifications
Attribute name Attribute value
Shipping State WISCONSIN
Cutter Type Solid End Mill
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) WELDON0.7500
Machine Side (Toolpost) Connection Type Weldon
Overall Length 4.0000 101.60MM
Shank Or Pilot Diameter 0.7500 19.05MM - 3/4
Family Group Knuckle Dragger
Coolant Thru Non Coolant
Coating TiAlN
Mach Side Connection Size 0.7500 19.05MM - 3/4
Tool Diameter 0.7500 19.05MM - 3/4
Flutes Or Inserts 5
Length Type Stub
Performance Rating High Performance
Length Of Cut 1.0000 25.40MM
End Of Tool Shape Corner Chamfer
Cutter Style Carbide Fine Pitch Rougher
Single Or Double End Single End
Inch Or Metric Inch
Helix Angle Variable
Center Cutting Center Cutting
Only registered users can write reviews