Picture of Gorilla Mill CEM18B4 Dia 1/8" SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball NoseBall PRIMATE

Gorilla Mill CEM18B4 Dia 1/8" SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball NoseBall PRIMATE

Part Number: GOR70693

Need Assistance or Service? Please call 262-251-4020

Manufacturer: GORILLA MILL
SKU: 1199231
Vendor: Sussex Tool and Supply
$9.66
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.1250 3.17MM - 1/8
Cutter Type Solid End Mill
Length Type STANDARD
Performance Rating General Performance
Center Cutting Center Cutting
Overall Length 1.5000 38.10MM- 1-1/2
Machine Side (Toolpost) CYLINDRICAL0.1250
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 0.5000 12.70MM
End Of Tool Shape Ball Nose
Cutter Style Carbide Ball Finisher
Inch Or Metric Inch
Machine Side (Toolpost) Connection Type Cylindrical
Flutes Or Inserts 4
Shipping State WISCONSIN
Family Group Primate
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.1250 3.18MM - 1/8
Tool Diameter 0.1250 3.18MM - 1/8
Coolant Thru Non Coolant
Helix Angle 30°
Made In USA YES
Only registered users can write reviews