Picture of FLTP-2L AC50 Tool-Flo 612800LAC50 Groove Threading,Threading Insert 0.0030 0.08mm - 0.0050 0.13mm Radius Ext 8.00TPI - 36.00TPI Int 7.00TPI - 20.00TPI 60.0°

FLTP-2L AC50 Tool-Flo 612800LAC50 Groove Threading,Threading Insert 0.0030 0.08mm - 0.0050 0.13mm Radius Ext 8.00TPI - 36.00TPI Int 7.00TPI - 20.00TPI 60.0°

Part Number: TOO612800LAC50

Need Assistance or Service? Please call 262-251-4020

Manufacturer: TOOL-FLO
SKU: 1028381
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Hand Left Hand
Insert Application General Purpose
Cutter Type Insert
Inter Or Extern Int / Ext
Insert Size (IC) 2
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style TOP NOTCH
Grade AC50
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Top Notch
Shipping State TEXAS
Family Group Flo Thread
Cutting Edge Material Carbide
Coating AlTiN
Corner Radius 0.0030 0.08MM - 0.0050 0.13MM
Thread Teeth 1
Full or Partial Profile Partial Profile
Thread Type 60.0°
Made In USA YES
Insert Type Or Orientation Top Notch
Thread Pitch EXT 8.00TPI - 36.00TPI INT 7.00TPI - 20.00TPI
Only registered users can write reviews