Picture of FLRP-3094L C3 Tool-Flo 593894LC3 Grooving Insert 0.1890 4.80mm Wide 0.0940 2.39mm Radius

FLRP-3094L C3 Tool-Flo 593894LC3 Grooving Insert 0.1890 4.80mm Wide 0.0940 2.39mm Radius

Part Number: TOO593894LC3

Need Assistance or Service? Please call 262-251-4020

Manufacturer: TOOL-FLO
SKU: 1091466
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Insert Application General Purpose
Cutter Type Insert
Depth Of Cut Max 0.1800
Insert Size (IC) 3
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style TOP NOTCH
Grade C3
Cutting Width 0.1890 4.80MM
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape Top Notch
Shipping State TEXAS
Cutting Edge Material Carbide
Coating TIN
Corner Radius 0.0940 2.39MM
Made In USA YES
Insert Type Or Orientation Top Notch
Only registered users can write reviews