Picture of Emuge TA223344.1510 Carbide Drill Coolant Thru Carbide 135° 0.442 Diameter 0.629 Shank 4.015 OAL 2.165 Flute 2 Flute TiAlN-TA14

Emuge TA223344.1510 Carbide Drill Coolant Thru Carbide 135° 0.442 Diameter 0.629 Shank 4.015 OAL 2.165 Flute 2 Flute TiAlN-TA14

Part Number: EMUTA223344.1510

Need Assistance or Service? Please call 262-251-4020

Manufacturer: EMUGE
SKU: 1104894
Vendor: Sussex Tool and Supply
$632.05
Products specifications
Attribute name Attribute value
Shipping State MASSACHUSETTS
Cutter Type Carbide Drill
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Machine Side (Toolpost) CYLINDRICAL0.6299
Machine Side (Toolpost) Connection Type Cylindrical
Overall Length 4.0157 102.00MM
Shank Or Pilot Diameter 0.6299 16.00MM
Family Group EF / Carbide Drills
Coolant Thru Thru Coolant
Coating TiAlN-TA14
Mach Side Connection Size 0.6299 16.00MM
Tool Diameter 0.4429 11.25MM
Flutes Or Inserts 2
Type of Tool Drill
Included Angle 135°
Flute Length 2.1650 54.99MM
Cut Diameter Min 0.4429 11.25MM
Diameter Deep 8.0x Dia
Only registered users can write reviews