Picture of Emuge CU969401.5017 Tap 7/8-9.00TPI Bottoming NC/UNC DINSI 1.5P-2.0P Coolant HSS HSSE TiCN

Emuge CU969401.5017 Tap 7/8-9.00TPI Bottoming NC/UNC DINSI 1.5P-2.0P Coolant HSS HSSE TiCN

Part Number: EMUCU969401.5017 ISO: CU969401.5017
Tool Cross-Reference
Looking for alternatives…
Find a drill for this tap 0 drills
7/8" × 9.00TPI Cut
% of thread 75%
Target drill —
Drill products available across the % thread range
50% 90%
Closest drill
—
View this drill →
Heads up: the drill list shows every drill within ±5% thread of your selection (so diameters vary across that band).

Need Assistance or Service? Please call 262-251-4020

Manufacturer:
SKU: 1156288
Vendor: Sussex Tool and Supply
$318.07

Description

EMUGE CU969401.5017 7/8"x9.00TPI Cut Straight Flute Bottoming 1.5P-2.0P HSSE TiCN 2B NC/UNC Steel Titanium Carbo-Nitride (TiCN) has the highest lubricitiy of all the TiN coatings - making it an excellent choice as a dry film lubricant where improved hardness and wear resistance beyond standard Calico TiN is needed. TiCN is normally applied to steels, hardened steel, and stainless steel materials. TiCN is an excellent coating when working against bronze, brass and plastic, therefore, it a good choice for stamping, punching, and forming. Can be stripped and recoated.
Products specifications
Attribute name Attribute value
General Information
Shipping State MASSACHUSETTS
Made In USA NO
Cutter Type Tapping
Coolant Thru Thru Coolant
Type Of Tool Tap
Length Type STANDARD
Thread Type NC/UNC
Flute Direction STRAIGHT
Tap Style Cut Straight Flute
Tap Type Bottoming
Tap Chamfer 1.5P-2.0P
Dimensions & Sizing
Overall Length 5.5120 140.00MM
Shank/Pilot Dia 0.6970 17.70MM
Flutes/Inserts 4
Thread Pitch 9.00TPI
Thread Size 7/8"
Tap Drill Range 0.7594 19.29MM - 0.7882 20.02MM
Tap Square 0.5230
Performance & Capacity
Cut Rating Gray Iron, Ductile Iron
Performance Rating High Performance
Tolerances & Accuracy
Thread Limit 2B
Materials & Finish
Tool Material Steel
Cutting Edge Mat HSSE
Coating TICN
Standards & Identification
Dimension Standard DINSI
Only registered users can write reviews