Picture of Emuge 3440A.08015B Dia 1.50mm SH 0.3937 LOC 1.0236 OAL2.834 End Mill Taper Flute Carbide TiAlN Single End Ball NoseBall Turbine Program

Emuge 3440A.08015B Dia 1.50mm SH 0.3937 LOC 1.0236 OAL2.834 End Mill Taper Flute Carbide TiAlN Single End Ball NoseBall Turbine Program

Part Number: EMU3440A.08015B

Need Assistance or Service? Please call 262-251-4020

Manufacturer: EMUGE
SKU: 1182134
Vendor: Sussex Tool and Supply
$0.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.3937 10.00MM
Cutter Type Solid End Mill
Length Type STANDARD
Performance Rating High Performance
Center Cutting Center Cutting
Overall Length 2.8346 72.00MM
Machine Side (Toolpost) CYLINDRICAL0.3937
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 1.0236 26.00MM
End Of Tool Shape Ball Nose
Cutter Style Ball Taper Flute Finisher
Inch Or Metric Metric
Machine Side (Toolpost) Connection Type Cylindrical
Flutes Or Inserts 3
Taper Angle 8.0°
Shipping State MASSACHUSETTS
Family Group Turbine Program
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.3937 10.00MM
Coating TiAlN
Tool Diameter 0.0591 1.50MM
Coolant Thru Non Coolant
Helix Angle 45°
Made In USA No
Taper Or Straight Flute Taper Flute
Only registered users can write reviews