Picture of DTR478-239 T9125 Tungaloy 6993874 Grooving,Groove Turning Insert 0.1880 4.78mm Wide 0.0940 2.39mm Radius

DTR478-239 T9125 Tungaloy 6993874 Grooving,Groove Turning Insert 0.1880 4.78mm Wide 0.0940 2.39mm Radius

Part Number: TUN6993874

Need Assistance or Service? Please call 262-251-4020

Manufacturer: TUNGALOY
SKU: 1092974
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Insert Application General Purpose
Cutter Type Insert
Insert Size (IC) 4
Insert Type Positive
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style DT
Grade T9125
Cutting Width 0.1880 4.78MM
Insert Or Tool INSERT
Shipping State ILLINOIS
Cutting Edge Material Carbide
Coating TI + Al2O3
Corner Radius 0.0940 2.39MM
Made In USA No
Insert Type Or Orientation Clamp Down
Only registered users can write reviews