ANSI: SNMG433-PER-DPC25UT
ISO: SNMG120416-PER-DPC25UT
First Choice: For Roughing Application of Carbon & Alloy Steel, Stainless Steel, with Large Depth of Cut and High Feed per Revolution at Medium SFM (Vc), Light interrupted Cut, Wet Working Condition
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
For universal turning applications at a medium SFM. Use inserts to cut Alloy Steel and Stainless Steel. Inserts have hard, tough, impact, wear and abrasive resistant substrate with a CVD Al2O3/TiCl2O3/TiCN coating.
