Picture of DNMG 433-MF4 TM1501 Seco DNMG 150412-MF4 TM1501 55.0° Negative Carbide Finishing, Semi Finishing

DNMG 433-MF4 TM1501 Seco DNMG 150412-MF4 TM1501 55.0° Negative Carbide Finishing, Semi Finishing

Part Number: SECO03273940

Need Assistance or Service? Please call 262-251-4020

Manufacturer: SECO
SKU: 1005636
Vendor: Sussex Tool and Supply
$25.30
This product has a minimum quantity of 10

SECO TM1501 carbide insert with TiCN Al2O3 Cr coating for semi finishing and negative 55.0° cutting. Coating includes TiCN, Al2O3, and Cr. Grade is TM1501. Made in Usa: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3 + Cr
  • Grade: TM1501

Grades & Coatings

  • Alternate Description: SECO DNMG 150412-MF4 TM1501 Negative 55.0° Insert DNMG 150412-MF4 TM1501 DNMG 433-MF4 TM1501

Other Details

  • Brand: SECO
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Provides negative carbide finishing and semi finishing. Used for precision cutting operations with 55.0° negative angle. Suitable for metal cutting tasks with TM1501 grade.

Composition

TiCN + Al2O3 + Cr coating. Made with DNMG 150412-MF4 TM1501 insert. Grade TM1500.

Typical Uses

DNMG 433-MF4 TM1501 for finishing and semi finishing. Applied in cutting operations with 55.0° negative angle. Used in metal machining with SECO insert.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3 + Cr
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Insert Style DN
Insert Shape Or Cutter Pocket Shape 55.0°
Insert Type Negative
Insert Size (IC) 15 "43"
Grade TM1501
Insert Fits 55.0°
Only registered users can write reviews