Picture of Dijet ZCMT100308R JC5015 Milling Insert Paralelagram 0.031 Corner Radius Carbide Multilayer

Dijet ZCMT100308R JC5015 Milling Insert Paralelagram 0.031 Corner Radius Carbide Multilayer

Part Number: DIJZCMT100308R JC5015

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1004083
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

Carbide parallelogram milling insert with multilayer coating 90 degree corner radius grade JC5015. Brand: DIJET. Alternate Description: DIJET ZCMT100308R JC5015 Parallelogram 90 DEGREE Positive Multilayer ZCMT100308R JC5015 ZCMT100308R JC5015. Coating: Multilayer. Tool Material: Carbide. Grade: JC5015.

Key Details

Materials & Finish

  • Coating: Multilayer
  • Tool Material: Carbide
  • Grade: JC5015

Grades & Coatings

  • Alternate Description: DIJET ZCMT100308R JC5015 Parallelogram 90 DEGREE Positive Multilayer ZCMT100308R JC5015 ZCMT100308R JC5015

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling insert performs cutting operations. It features parallel geometry with 90 degree angle. Used in precision milling tasks.

Composition

Carbide tool material with multilayer coating. Grade JC5015. Parallelogram shape with 0.031 corner radius.

Typical Uses

Milling operations. Cutting in parallel geometry. Applied in machining setups.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating Multilayer
Insert Or Tool Insert
Insert Application Roughing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style ZP
Insert Shape Or Cutter Pocket Shape Parallelogram
Insert Type Positive
Insert Size (IC) 10
Grade JC5015
Insert Fits Parallelogram
Insert Screw EWS-206
Only registered users can write reviews