Picture of Dijet WOMT04T215ZER JC8015 Milling Insert Trigon 0.059 Corner Radius Carbide PVD Special

Dijet WOMT04T215ZER JC8015 Milling Insert Trigon 0.059 Corner Radius Carbide PVD Special

Part Number: DIJWOMT04T215ZER JC8015

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1004294
Vendor: Sussex Tool and Supply
$7.84
This product has a minimum quantity of 10

Carbide milling insert with PVD Special coating corner radius 0.059 inch grade JC8015. Brand DIJET. Alternate Description DIJET WOMT04T215ZER JC8015 Trigon Insert Positive PVD Special. Made In Usa: No.

Key Details

Materials & Finish

  • Coating: PVD Special
  • Tool Material: Carbide
  • Grade: JC8015

Grades & Coatings

  • Alternate Description: DIJET WOMT04T215ZER JC8015 Trigon Insert Positive PVD Special WOMT04T215ZER JC8015 WOMT04T215ZER JC8015

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling insert performs cutting with trigon shape. Used for corner radius cutting with 0.059 inch radius. Operates with carbide tool material and PVD coating.

Composition

Carbide tool material, PVD Special coating, trigon shape, 0.059 corner radius.

Typical Uses

Milling operations, cutting edges, precision machining with corner radius. Applied in tools requiring high durability and wear resistance.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating PVD Special
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0590 1.50MM
Insert Style WO
Insert Shape Or Cutter Pocket Shape Trigon
Insert Type Positive
Insert Size (IC) 4
Grade JC8015
Insert Fits Trigon
Insert Screw TSW-2556H
Only registered users can write reviews