Picture of Dijet WDMT10X620ZTR JC8050 Milling Insert Trigon 0.079 Corner Radius Carbide PVD Special

Dijet WDMT10X620ZTR JC8050 Milling Insert Trigon 0.079 Corner Radius Carbide PVD Special

Part Number: DIJWDMT10X620ZTR JC8050

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1004326
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

DIJET carbide trigon milling insert with PVD Special coating grade JC8050. Made in Usa: No. Shipping state: MICHIGAN. Alternate Description: DIJET WDMT10X620ZTR JC8050 Trigon Insert Positive PVD Special WDMT10X620ZTR JC8050 WDMT10X620ZTR JC8050.

Key Details

Materials & Finish

  • Coating: PVD Special
  • Tool Material: Carbide
  • Grade: JC8050

Grades & Coatings

  • Alternate Description: DIJET WDMT10X620ZTR JC8050 Trigon Insert Positive PVD Special WDMT10X620ZTR JC8050 WDMT10X620ZTR JC8050

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling with trigon corner radius. Performs cutting in machining operations. Designed for precision work with carbide material.

Composition

Carbide tool material. PVD Special coating. Grade JC8050.

Typical Uses

Used in milling operations. Fits DIJET WDMT10X620ZTR JC8050 tools. Applied in cutting tasks with corner radius 0.079.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating PVD Special
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0790 2.01MM
Insert Style WD
Insert Shape Or Cutter Pocket Shape Trigon
Insert Type Positive
Insert Size (IC) 10
Grade JC8050
Insert Fits Trigon
Insert Screw DSW-4512H
Only registered users can write reviews