Picture of Dijet WDMT10X620ZTR JC5015 Milling Insert Trigon 0.079 Corner Radius Carbide Multilayer

Dijet WDMT10X620ZTR JC5015 Milling Insert Trigon 0.079 Corner Radius Carbide Multilayer

Part Number: DIJWDMT10X620ZTR JC5015

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1004323
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

Carbide trigon milling insert with multilayer coating grade JC5015. Brand: DIJET. Alternate Description: DIJET WDMT10X620ZTR JC5015 Trigon Insert Positive Multilayer WDMT10X620ZTR JC5015. Coating: Multilayer. Tool Material: Carbide. Grade: JC5015.

Key Details

Materials & Finish

  • Coating: Multilayer
  • Tool Material: Carbide
  • Grade: JC5015

Grades & Coatings

  • Alternate Description: DIJET WDMT10X620ZTR JC5015 Trigon Insert Positive Multilayer WDMT10X620ZTR JC5015 WDMT10X620ZTR JC5015

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling insert performs cutting functions in machining operations. It features a trigon shape and 0.079 corner radius for precise edge performance. Used in cutting tools for metal work with carbide material.

Composition

Carbide tool material with multilayer coating. Grade JC5015. Trigon geometry with 0.079 corner radius.

Typical Uses

Milling operations in metal cutting. Applied in machining setups. Used with DIJET WDMT10X620ZTR JC5015 inserts for cutting tasks.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating Multilayer
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0790 2.01MM
Insert Style WD
Insert Shape Or Cutter Pocket Shape Trigon
Insert Type Positive
Insert Size (IC) 10
Grade JC5015
Insert Fits Trigon
Insert Screw DSW-4512H
Only registered users can write reviews