Picture of Dijet WDMT10X620ZER JC600 Milling Insert Trigon 0.079 Corner Radius Carbide PVD Special

Dijet WDMT10X620ZER JC600 Milling Insert Trigon 0.079 Corner Radius Carbide PVD Special

Part Number: DIJWDMT10X620ZER JC600

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1004319
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

Carbide trigon milling insert with PVD Special coating grade JC600. Brand: DIJET. Alternate Description: DIJET WDMT10X620ZER JC600. Coating: PVD Special. Tool Material: Carbide. Grade: JC600.

Key Details

Materials & Finish

  • Coating: PVD Special
  • Tool Material: Carbide
  • Grade: JC600

Grades & Coatings

  • Alternate Description: DIJET WDMT10X620ZER JC600 Trigon Insert Positive PVD Special WDMT10X620ZER JC600 WDMT10X620ZER JC600

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling insert performs cutting operations. Designed for precision cutting in machining. Uses trigon geometry for stability and strength.

Composition

Carbide tool material with PVD Special coating. Grade JC600 provides hardness and wear resistance. Corner radius 0.079 inches.

Typical Uses

Used in milling applications with high precision. Suitable for cutting metals under heavy loads. Applied in machining processes.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating PVD Special
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0790 2.01MM
Insert Style WD
Insert Shape Or Cutter Pocket Shape Trigon
Insert Type Positive
Insert Size (IC) 10
Grade JC600
Insert Fits Trigon
Insert Screw DSW-4512H
Only registered users can write reviews