Picture of Dijet WDMT080520ZER JC730U Milling Insert Trigon 0.079 Corner Radius Carbide PVD Special

Dijet WDMT080520ZER JC730U Milling Insert Trigon 0.079 Corner Radius Carbide PVD Special

Part Number: DIJWDMT080520ZER JC730U

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1004312
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

DIJET carbide milling insert with PVD Special coating grade JC730U. Trigon corner radius 0.079 inches. Made in Usa: No. Shipping state: MICHIGAN.

Key Details

Materials & Finish

  • Coating: PVD Special
  • Tool Material: Carbide
  • Grade: JC730U

Grades & Coatings

  • Alternate Description: DIJET WDMT080520ZER JC730U Trigon Insert Positive PVD Special WDMT080520ZER JC730U WDMT080520ZER JC730U

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling insert performs cutting functions in machining operations. It features trigon geometry for precise edge alignment. Used in cutting tools with carbide material and PVD coating.

Composition

Carbide tool material with PVD Special coating. Grade JC730U. Trigon shape with 0.079 corner radius.

Typical Uses

Milling operations. Cutting in metalworking. Applications with positive PVD special insert design.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating PVD Special
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0790 2.01MM
Insert Style WD
Insert Shape Or Cutter Pocket Shape Trigon
Insert Type Positive
Insert Size (IC) 8
Grade JC730U
Insert Fits Trigon
Insert Screw DSW-4510H
Only registered users can write reviews