Picture of Dijet RME-0500-031 JC5003 Milling Insert Back Draft 0.031 Corner Radius Multilayer

Dijet RME-0500-031 JC5003 Milling Insert Back Draft 0.031 Corner Radius Multilayer

Part Number: DIJRME-0500-031 JC5003

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1003788
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

DIJET milling insert with back draft 0.031 inch corner radius. Multilayer coating made from carbide grade JC5003. Back draft 0.031 inch corner radius. Tool material carbide grade JC5003.

Key Details

Materials & Finish

  • Coating: Multilayer
  • Tool Material: Carbide
  • Grade: JC5003

Grades & Coatings

  • Alternate Description: DIJET Milling Insert Back Draft 0.031 Corner Radius Multilayer RME-0500-031 JC5003 RME-0500-031 JC5003

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling insert performs back draft cutting with 0.031 corner radius. Designed for precision milling operations. Functions with multilayer coating for durability.

Composition

Carbide tool material, multilayer coating, back draft design. Grade JC5003, corner radius 0.031. Constructed with DIJET specifications.

Typical Uses

Used in milling applications with back draft design. Suitable for cutting with 0.031 corner radius. Applied in milling tools with JC5003 grade.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating Multilayer
Tool Diameter 0.5000 12.70MM - 1/2
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style RM
Insert Shape Or Cutter Pocket Shape Flat Blade
Insert Type Neutral
Insert Size (IC) 5
Grade JC5003
Insert Fits Back Draft
Insert Screw FSW-3509
Only registered users can write reviews