Picture of Dijet RME-0500-015 JC5015 Milling Insert Back Draft 0.015 Corner Radius Multilayer

Dijet RME-0500-015 JC5015 Milling Insert Back Draft 0.015 Corner Radius Multilayer

Part Number: DIJRME-0500-015 JC5015

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DIJET
SKU: 1003809
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

Milling insert with back draft 0.015 inch corner radius. Multilayer coating carbide tool grade JC5015. Brand: DIJET. Alternate Description: DIJET Milling Insert Back Draft 0.015 Corner Radius Multilayer RME-0500-015 JC5015 RME-0500-015 JC5015.

Key Details

Materials & Finish

  • Coating: Multilayer
  • Tool Material: Carbide
  • Grade: JC5015

Grades & Coatings

  • Alternate Description: DIJET Milling Insert Back Draft 0.015 Corner Radius Multilayer RME-0500-015 JC5015 RME-0500-015 JC5015

Other Details

  • Brand: DIJET
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Milling insert performs back draft cutting with 0.015 corner radius. Used for precision milling operations. Designed for multilayer carbide grade JC5015.

Composition

Carbide tool material with multilayer coating. Back draft design with 0.015 corner radius. Grade JC5-015.

Typical Uses

Milling insert used in milling operations. Applied in back draft cutting tasks. Suitable for multilayer carbide applications.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Tool Material Carbide
Coating Multilayer
Tool Diameter 0.5000 12.70MM - 1/2
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0150 0.38MM
Insert Style RM
Insert Shape Or Cutter Pocket Shape Flat Blade
Insert Type Neutral
Insert Size (IC) 5
Grade JC5015
Insert Fits Back Draft
Insert Screw FSW-3509
Only registered users can write reviews