Picture of Dapra XPET120416 ALU-DMK25-TCI Milling Insert Paralelagram 0.063 Corner Radius TiAlN

Dapra XPET120416 ALU-DMK25-TCI Milling Insert Paralelagram 0.063 Corner Radius TiAlN

Part Number: DAP32625

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DAPRA
SKU: 1002885
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

DAPRA milling insert with paralelagram shape 0.063 corner radius coated with TiAlN grade DMK25-TCI. Made in USA, shipped from Connecticut. Brand: DAPRA. Coating: TiAlN. Grade: DMK25-TCI.

Key Details

Materials & Finish

  • Coating: TiAlN
  • Grade: DMK25-TCI

Grades & Coatings

  • Alternate Description: DAPRA Milling Insert Paralelagram 0.063 Corner Radius TiAlN XPET120416 ALU-DMK25-TCI XPET120416 ALU-DMK25-TCI

Other Details

  • Brand: DAPRA
  • Shipping State: CONNECTICUT
  • Made In Usa: Yes

Technical Overview

What It Does

Milling insert performs cutting function in machining operations. Designed for parallel edge geometry with 0.063 corner radius. Used in precision cutting tasks with TiAlN coating.

Composition

DAPRA milling insert with ALU-DMK25-TCI grade and TiAlN coating. Made in USA. Constructed with parallelagram shape and 0.06 TCI corner radius.

Typical Uses

Applied in milling operations with parallel edge design. Suitable for cutting with 0.063 corner radius. Used in machining with TiAlN coated inserts.

Products specifications
Attribute name Attribute value
Shipping State Connecticut
Cutter Type Insert
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiAlN
Insert Or Tool Insert
Insert Application Roughing, Semi Finishing
Corner Radius 0.0630 1.60MM
Insert Style XP
Insert Shape Or Cutter Pocket Shape Parallelogram
Insert Type Positive
Insert Size (IC) 12
Grade DMK25-TCI
Insert Fits Parallelogram
Only registered users can write reviews