Picture of Dapra BDR500-N-FPO-HM-R1/32 Milling Insert Back Draft 0.031 Corner Radius AlTiN

Dapra BDR500-N-FPO-HM-R1/32 Milling Insert Back Draft 0.031 Corner Radius AlTiN

Part Number: DAP46865

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DAPRA
SKU: 1002043
Vendor: Sussex Tool and Supply
$31.77
This product has a minimum quantity of 10

Dapra milling insert with back draft 0.031 corner radius. AlTiN coating, FPO-HM grade. Made in USA. Shipping state: Connecticut.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Grade: FPO-HM

Grades & Coatings

  • Alternate Description: DAPRA Milling Insert Back Draft 0.031 Corner Radius AlTiN BDR500-N-FPO-HM-R1/32 BDR500-N-FPO-HM-R1/32

Other Details

  • Brand: DAPRA
  • Shipping State: CONNECTICUT
  • Made In Usa: Yes

Technical Overview

What It Does

Milling insert performs back draft function. Designed for cutting with 0.031 corner radius. Operates with AlTiN coating and FPO-HM grade.

Composition

Dapra milling insert with AlTiN coating. Grade FPO-HM. Back draft design with 0.031 corner radius.

Typical Uses

Used in milling operations. Fits BDR500-N-FPO-HM-R1/32 specification. Suitable for cutting tasks in USA-made tools.

Products specifications
Attribute name Attribute value
Shipping State Connecticut
Cutter Type Insert
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating AlTiN
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style BD
Insert Shape Or Cutter Pocket Shape Flat Blade
Insert Type Neutral
Insert Size (IC) 50
Grade FPO-HM
Insert Fits Back Draft
Only registered users can write reviews