Picture of Dapra BDR500-N-FPO-HM-R1/16 Milling Insert Back Draft 0.063 Corner Radius AlTiN

Dapra BDR500-N-FPO-HM-R1/16 Milling Insert Back Draft 0.063 Corner Radius AlTiN

Part Number: DAP46965

Need Assistance or Service? Please call 262-251-4020

Manufacturer: DAPRA
SKU: 1002044
Vendor: Sussex Tool and Supply
$31.77
This product has a minimum quantity of 10

Dapra milling insert with back draft 0.063 corner radius. AlTiN coating, FPO-HM grade. Made in USA. Shipping state: Connecticut.

Key Details

Materials & Finish

  • Coating: AlTiN
  • Grade: FPO-HM

Grades & Coatings

  • Alternate Description: DAPRA Milling Insert Back Draft 0.063 Corner Radius AlTiN BDR500-N-FPO-HM-R1/16 BDR500-N-FPO-HM-R1/16

Other Details

  • Brand: DAPRA
  • Shipping State: CONNECTICUT
  • Made In Usa: Yes

Technical Overview

What It Does

Milling insert performs back draft cutting with 0.063 corner radius. Used in machining operations with AlTiN coating. Functions with FPO-HM grade for durability.

Composition

Dapra milling insert with AlTiN coating and FPO-HM grade. Back draft design with 0.063 corner radius. Made in USA.

Typical Uses

Milling operations with back draft design. Cutting tasks using AlTiN coated insert. Applied in machining with FPO-HM grade.

Products specifications
Attribute name Attribute value
Shipping State Connecticut
Cutter Type Insert
Made In USA YES
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating AlTiN
Insert Or Tool Insert
Insert Application Finishing, Semi Finishing
Corner Radius 0.0630 1.60MM
Insert Style BD
Insert Shape Or Cutter Pocket Shape Flat Blade
Insert Type Neutral
Insert Size (IC) 50
Grade FPO-HM
Insert Fits Back Draft
Only registered users can write reviews