Picture of CRYSTAllUME P820-200717-1 End Mill Sharp High Helix Mold Makers Sharp End 0.500 Diameter 0.500 Shank 6.000 OAL 1.500 LOC4 Flute Diamond

CRYSTAllUME P820-200717-1 End Mill Sharp High Helix Mold Makers Sharp End 0.500 Diameter 0.500 Shank 6.000 OAL 1.500 LOC4 Flute Diamond

Part Number: CRYP820-200717-1

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CRYSTALLUME
SKU: 1217653
Vendor: Sussex Tool and Supply
$441.00
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Shank Or Pilot Diameter 0.5000 12.70MM - 1/2
Cutter Type Solid End Mill
Length Type LONG
Performance Rating High Performance
Center Cutting Center Cutting
Overall Length 6.0000 152.40MM
Machine Side (Toolpost) CYLINDRICAL0.5000
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Length Of Cut 1.5000 38.10MM
End Of Tool Shape Square
Cutter Style Carbide Finisher
Inch Or Metric Inch
Machine Side (Toolpost) Connection Type Cylindrical
Flutes Or Inserts 4
Shipping State CALIFORNIA
Family Group Mold Makers
Single Or Double End Single End
Cutting Edge Material Carbide
Tool Material Carbide
Mach Side Connection Size 0.5000 12.70MM - 1/2
Coating Diamond
Tool Diameter 0.5000 12.70MM - 1/2
Coolant Thru Non Coolant
Helix Angle 30°
Made In USA YES
Only registered users can write reviews