Picture of CNMM546SN-R88CTCP115 Ceratizit CNMM160624SN-R88CTCP115 80.0° Negative Carbide 0.0940 2.39mm Radius Roughing

CNMM546SN-R88CTCP115 Ceratizit CNMM160624SN-R88CTCP115 80.0° Negative Carbide 0.0940 2.39mm Radius Roughing

Part Number: CER11715636

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001669
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert 80.0 degree negative carbide TiCN Al2O3 coating CTCP115 grade 0.0940 2.39mm radius roughing. Coating is TiCN plus Al2O3. Grade CTCP115. Made in Usa: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM160624SN-R88CTCP115 80.0° Turning Insert TiCN + Al2O3 CNMM160624SN-R88CTCP115 CNMM546SN-R88CTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Ceratizit CNMM546SN-R88CTCP115 is a negative carbide turning insert for roughing. It has 80.0° angle and 2.39mm radius. Used for cutting operations with TiCN + Al2O3 coating.

Composition

Grade CTCP115 with TiCN + Al2O3 coating. Made from carbide. Negative geometry with 80.0° angle and 2.39mm radius.

Typical Uses

Roughing operations in turning. Used with CNMM160624SN-R88CTCP115. Suitable for cutting with TiCN + Al2O3 coating.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0940 2.39MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 16 "54"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews