Picture of CNMM544EN-R28CTCP115 Ceratizit CNMM160616EN-R28CTCP115 80.0° Negative Carbide 0.0630 1.60mm Radius Roughing

CNMM544EN-R28CTCP115 Ceratizit CNMM160616EN-R28CTCP115 80.0° Negative Carbide 0.0630 1.60mm Radius Roughing

Part Number: CER11696303

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001659
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN Al2O3 coating 80 degree negative angle 0.0630 radius. Coating is TiCN + Al2O3. Grade is CTCP115. Application is roughing.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM160616EN-R28CTCP115 80.0° Turning Insert TiCN + Al2O3 CNMM160616EN-R28CTCP115 CNMM544EN-R28CTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for roughing with 80.0° negative carbide cutting edge. Performs turning operations with TiCN + Al2O3 coating. Suitable for 0.0630 1.60mm radius cutting tasks.

Composition

Carbide grade CTCP115 with TiCN + Al2O3 coating. Made from CERATIZIT material. Includes 80.0° negative cutting edge.

Typical Uses

Roughing in turning operations. Applied on 1.60mm radius tools. Used in CNMM544EN-R28CTCP115 cutting applications.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0630 1.60MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 16 "54"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews