Picture of CNMM543EN-R58CTCP135 Ceratizit CNMM160612EN-R58CTCP135 80.0° Negative Carbide 0.0470 1.19mm Radius Roughing

CNMM543EN-R58CTCP135 Ceratizit CNMM160612EN-R58CTCP135 80.0° Negative Carbide 0.0470 1.19mm Radius Roughing

Part Number: CER11923499

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001656
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert TiCN Al2O3 80.0 degree negative 0.0470 1.19mm radius roughing. Brand: CERATIZIT. Coating: TiCN + Al2O3. Grade: CTCP135.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP135

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM160612EN-R58CTCP135 80.0° Turning Insert TiCN + Al2O3 CNMM160612EN-R58CTCP135 CNMM543EN-R58CTCP135

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for roughing with 80.0° negative carbide cutting edge. Provides cutting performance with TiCN + Al2O3 coating. Suitable for turning operations with 1.19mm radius.

Composition

Carbide grade CTCP135 with TiCN + Al2O3 coating. Made from CERATIZIT material. Includes CNMM543EN-R58CTCP135 and CNMM160612EN-R58CTCP136.

Typical Uses

Roughing in turning. Applied in 80.0° negative carbide cutting. Used with 1.19mm radius for cutting operations.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0470 1.19MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 16 "54"
Grade CTCP135
Insert Fits 80.0°
Only registered users can write reviews