Picture of CNMM433EN-R58CTCP125 Ceratizit CNMM120412EN-R58CTCP125 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

CNMM433EN-R58CTCP125 Ceratizit CNMM120412EN-R58CTCP125 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

Part Number: CER11696373

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001641
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating. Grade CTCP125, 80.0 degree negative carbide. Radius 11.94mm, 0.4700. Made in USA: No, shipping state MICHIGAN.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP125

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM120412EN-R58CTCP125 80.0° Turning Insert TiCN + Al2O3 CNMM120412EN-R58CTCP125 CNMM433EN-R58CTCP125

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for turning with 80.0° negative carbide angle. Performs roughing with 11.94mm radius. Suitable for CNMM120412EN-R58CTCP125 applications.

Composition

TiCN + Al2O3 coating. Grade CTCP125. Carbide base.

Typical Uses

Roughing operations. Turning inserts. CNMM120412EN-R58CTCP125 use cases.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP125
Insert Fits 80.0°
Only registered users can write reviews