Picture of CNMM433EN-R58CTCP115 Ceratizit CNMM120412EN-R58CTCP115 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

CNMM433EN-R58CTCP115 Ceratizit CNMM120412EN-R58CTCP115 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

Part Number: CER11696298

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001640
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert 80.0 degree negative carbide TiCN Al2O3 coating CTCP115 grade 11.94mm radius roughing. Brand: CERATIZIT. Coating: TiCN + Al2O3. Grade: CTCP115.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM120412EN-R58CTCP115 80.0° Turning Insert TiCN + Al2O3 CNMM120412EN-R58CTCP115 CNMM433EN-R58CTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Ceratizit CNMM433EN-R58CTCP115 is a carbide turning insert for roughing with 80.0° negative angle. It provides cutting performance with TiCN + Al2O3 coating. Used for 11.94mm radius turning operations.

Composition

Ceratizit CNMM433EN-R58CTCP115 has TiCN + Al2O3 coating and CTCP115 grade. Made with carbide material. Not specified.

Typical Uses

Used in turning with 80.0° negative angle. Applied for roughing with 11.94mm radius. Suitable for CNMM120412EN-R58CTCP115 operations.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews