Picture of CNMM433EN-R28CTCP135 Ceratizit CNMM120412EN-R28CTCP135 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

CNMM433EN-R28CTCP135 Ceratizit CNMM120412EN-R28CTCP135 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

Part Number: CER11988159

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001639
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN Al2O3 coating 80.0 degree negative carbide 0.4700 inch 11.94mm radius roughing. Coating is TiCN + Al2O3. Grade is CTCP135. Made in Usa: No. Shipping state is MICHIGAN.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP135

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM120412EN-R28CTCP135 80.0° Turning Insert TiCN + Al2O3 CNMM120412EN-R28CTCP135 CNMM433EN-R28CTCP135

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for roughing operations. Designed for 80.0° negative carbide cutting. Provides 11.94mm radius cutting action.

Composition

Made of TiCN + Al2O3 coating. Grade CTCP135. Carried in CNMM433EN-R28CTCP135 format.

Typical Uses

Applied in turning insert tasks. Suitable for CNMM120412EN-R28CTCP135 operations. Used in roughing cuts with 80.0° negative angle.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP135
Insert Fits 80.0°
Only registered users can write reviews