Picture of CNMM433EN-R28CTCP115 Ceratizit CNMM120412EN-R28CTCP115 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

CNMM433EN-R28CTCP115 Ceratizit CNMM120412EN-R28CTCP115 80.0° Negative Carbide 0.4700 11.94mm Radius Roughing

Part Number: CER11696297

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001637
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN Al2O3 coating 80.0 degree negative carbide 0.4700 inch 11.94mm radius roughing. Coating is TiCN + Al2O3. Grade is CTCP115. Made in Usa: No. Shipping state is MICHIGAN.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM120412EN-R28CTCP115 80.0° Turning Insert TiCN + Al2O3 CNMM120412EN-R28CTCP115 CNMM433EN-R28CTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for roughing operations with 80.0° negative carbide cutting edge. Provides cutting performance with TiCN + Al2O3 coating. Suitable for turning applications with 11.94mm radius.

Composition

Carbide grade CTCP115 with TiCN + Al2O3 coating. Includes 80.0° negative carbide geometry. Radius of 11.94mm.

Typical Uses

Roughing in turning operations. Applied on CNC turning tools. Used with CNMM433EN-R28CTCP115 and CNMM120412EN-R28CTCP115.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews