Picture of CNMM432EN-TRCTCP125 Ceratizit CNMM120408EN-TRCTCP125 80.0° Negative Carbide 0.0310 0.79mm Radius Roughing

CNMM432EN-TRCTCP125 Ceratizit CNMM120408EN-TRCTCP125 80.0° Negative Carbide 0.0310 0.79mm Radius Roughing

Part Number: CER11542664

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001635
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

Ceratizit turning insert 80 degree negative carbide TiCN Al2O3 coating CTCP125 0.79mm radius roughing. Brand: CERATIZIT. Coating: TiCN + Al2O3. Grade: CTCP125.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP125

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM120408EN-TRCTCP125 80.0° Turning Insert TiCN + Al2O3 CNMM120408EN-TRCTCP125 CNMM432EN-TRCTCP125

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for roughing with 80.0° negative carbide cutting edge. Performs turning operations with TiCN + Al2O3 coating. Suitable for CNMM120408EN-TRCTCP125 insert type.

Composition

Carbide grade CTCP125 with TiCN + Al2O3 coating. Made from negative carbide with 0.0310 inch radius. 0.79mm radius cutting edge.

Typical Uses

Roughing operations in turning. Applied on CNMM432EN-TRCTCP125 and CNMM120408EN-TRCTCP125 inserts. Used in machining with 80.0° negative carbide edge.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0310 0.79MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP125
Insert Fits 80.0°
Only registered users can write reviews