Picture of CNMM432EN-R58CTCP115 Ceratizit CNMM120408EN-R58CTCP115 80.0° Negative Carbide 0.0310 0.79mm Radius Roughing

CNMM432EN-R58CTCP115 Ceratizit CNMM120408EN-R58CTCP115 80.0° Negative Carbide 0.0310 0.79mm Radius Roughing

Part Number: CER11988210

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001632
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert 80.0 degree negative carbide TiCN Al2O3 coating CTCP115 grade 0.0310 inch 0.79mm radius roughing. Coating is TiCN plus Al2O3. Grade is CTCP115. Made in Usa: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMM120408EN-R58CTCP115 80.0° Turning Insert TiCN + Al2O3 CNMM120408EN-R58CTCP115 CNMM432EN-R58CTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for roughing with 80.0° negative carbide cutting edge. Provides cutting performance with TiCN + Al2O3 coating. Suitable for turning operations with 0.79mm radius.

Composition

Carbide grade CTCP115 with TiCN + Al2O3 coating. Made from negative carbide with 0.0310 inch radius. Includes CNMM432EN-R58CTCP115 and CNMM120408EN-R58CTCP115 models.

Typical Uses

Roughing in turning operations. Applied on CNC turning tools. Used with 80.0° negative carbide insert.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Roughing
Corner Radius 0.0310 0.79MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews