Picture of CNMG643EN-M70CTCP125 Ceratizit CNMG190612EN-M70CTCP125 80.0° Negative Carbide 0.0470 1.19mm Radius Medium, Semi Finishing

CNMG643EN-M70CTCP125 Ceratizit CNMG190612EN-M70CTCP125 80.0° Negative Carbide 0.0470 1.19mm Radius Medium, Semi Finishing

Part Number: CER11827119

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001591
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with 80 degree negative angle. Coated with TiCN and Al2O3. Grade CTCP125, 0.0470 inch, 1.19mm radius. Medium semi finishing insert.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP125

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG190612EN-M70CTCP125 80.0° Turning Insert TiCN + Al2O3 CNMG190612EN-M70CTCP125 CNMG643EN-M70CTCP125

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for semi finishing operations. Designed for 80.0° negative carbide cutting. Suitable for turning with TiCN + Al2O3 coating.

Composition

Carbide insert with TiCN + Al2O3 coating. Grade CTCP125. Medium radius of 1.19mm.

Typical Uses

Semi finishing on turning operations. Applied in cutting with 80.0° negative angle. Used with CNMG643EN-M70CTCP125 insert type.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0470 1.19MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 19 "64"
Grade CTCP125
Insert Fits 80.0°
Only registered users can write reviews