Picture of CNMG543EN-M70CTCK110 Ceratizit CNMG160612EN-M70CTCK110 80.0° Negative Carbide 0.0470 1.19mm Radius Medium, Semi Finishing

CNMG543EN-M70CTCK110 Ceratizit CNMG160612EN-M70CTCK110 80.0° Negative Carbide 0.0470 1.19mm Radius Medium, Semi Finishing

Part Number: CER12046547

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001566
Vendor: Sussex Tool and Supply
$28.11
This product has a minimum quantity of 10

CERATIZIT turning insert 80 degree negative carbide TiCN Al2O3 coating CTCK110 grade 0.0470 radius 1.19mm medium semi finishing. Made in Usa: No. Shipping state: MICHIGAN. Coating: TiCN + Al2O3. Grade: CTCK110.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCK110

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG160612EN-M70CTCK110 80.0° Turning Insert TiCN + Al2O3 CNMG160612EN-M70CTCK110 CNMG543EN-M70CTCK110

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for semi finishing on turning operations. Features 80.0° negative angle. Designed for medium radius with 0.0470 inch size.

Composition

TiCN + Al2O3 coating. Grade CTCK110. Made in USA: No.

Typical Uses

Semi finishing on turning. Applied to cylindrical surfaces. Used in machining with medium radius cutters.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0470 1.19MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 16 "54"
Grade CTCK110
Insert Fits 80.0°
Only registered users can write reviews