Picture of CNMG434EN-TRMCTCP125 Ceratizit CNMG120416EN-TRMCTCP125 80.0° Negative Carbide 0.0630 1.60mm Radius Medium, Semi Finishing

CNMG434EN-TRMCTCP125 Ceratizit CNMG120416EN-TRMCTCP125 80.0° Negative Carbide 0.0630 1.60mm Radius Medium, Semi Finishing

Part Number: CER11513847

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001552
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating 0.0630 inch radius medium grade CTCP125 for semi finishing applications. Coating is TiCN + Al2O3. Grade is CTCP125. Made in Usa: No.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP125

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120416EN-TRMCTCP125 80.0° Turning Insert TiCN + Al2O3 CNMG120416EN-TRMCTCP125 CNMG434EN-TRMCTCP125

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for semi finishing on turning operations. Features 80.0° negative carbide angle. Provides cutting performance with TiCN + Al203 coating.

Composition

Carbide grade CTCP125. Coated with TiCN + Al2O3. Made from CNMG434EN-TRMCTCP125 material.

Typical Uses

Semi finishing on turning. Applied in turning operations. Used with 1.60mm radius.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0630 1.60MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP125
Insert Fits 80.0°
Only registered users can write reviews