Picture of CNMG433EN-TFQCTEP110 Ceratizit CNMG120412EN-TFQCTEP110 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

CNMG433EN-TFQCTEP110 Ceratizit CNMG120412EN-TFQCTEP110 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

Part Number: CER12017722

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001535
Vendor: Sussex Tool and Supply
$17.41
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating grade CTEP110. 11.94mm radius 0.4700 inch medium semi finishing for 80.0 degree cut. Brand: CERATIZIT. Coating: TiCN + Al2O3. Grade: CTEP110.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTEP110

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120412EN-TFQCTEP110 80.0° Turning Insert TiCN + Al2O3 CNMG120412EN-TFQCTEP110 CNMG433EN-TFQCTEP110

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for turning with 80.0° negative carbide angle. Performs semi finishing on medium radius. Suitable for TiCN + Al2O3 coated cutting operations.

Composition

Carbide with TiCN + Al2O3 coating. Grade CTEP110. Medium radius 11.94mm.

Typical Uses

Semi finishing on turning operations. Applied to cylindrical surfaces. Used in cutting with 80.0° negative angle.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTEP110
Insert Fits 80.0°
Only registered users can write reviews