Picture of CNMG433EN-M70CTC2135 Ceratizit CNMG120412EN-M70CTC2135 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

CNMG433EN-M70CTC2135 Ceratizit CNMG120412EN-M70CTC2135 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

Part Number: CER11826639

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001527
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN TiNB coating grade CTC2135. 0.4700 inch 11.94mm radius 80.0 degree medium semi finishing. Coating: TiCN + TiNB. Grade: CTC2135.

Key Details

Materials & Finish

  • Coating: TiCN + TiNB
  • Grade: CTC2135

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120412EN-M70CTC2135 80.0° Turning Insert TiCN + TiNB CNMG120412EN-M70CTC2135 CNMG433EN-M70CTC2135

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Ceratizit CNMG433EN-M70CTC2135 is a carbide turning insert for semi finishing. It has an 80.0° angle and 0.4700 inch radius. Used for medium cutting operations with TiCN + TiNB coating.

Composition

Grade CTC2135, made with TiCN + TiNB coating. Carried in 11.94mm radius, 80.0° negative angle. Material is carbide.

Typical Uses

Semi finishing on turning operations. Applied in medium cutting tasks. Used with CNMG120412EN-M70CTC2135 insert type.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + TiNB
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTC2135
Insert Fits 80.0°
Only registered users can write reviews