Picture of CNMG433EN-M50CTCP125 Ceratizit CNMG120412EN-M50CTCP125 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

CNMG433EN-M50CTCP125 Ceratizit CNMG120412EN-M50CTCP125 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

Part Number: CER11513814

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001524
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating, 80.0 degree negative carbide, 0.4700 inch, 11.94mm radius, medium semi finishing. Grade CTCP125, made in USA no, shipping state MICHIGAN.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP125

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120412EN-M50CTCP125 80.0° Turning Insert TiCN + Al2O3 CNMG120412EN-M50CTCP125 CNMG433EN-M50CTCP125

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for turning with 80.0° negative angle. Performs semi finishing on carbide inserts. Designed for medium radius 0.4700 with 11.94mm radius.

Composition

Ceratizit CNMG433EN-M50CTCP125 with TiCN + Al2O3 coating. Grade CTCP125. Medium carbide insert.

Typical Uses

Semi finishing operations. Turning applications. Cutting on negative 80.0° angle.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP125
Insert Fits 80.0°
Only registered users can write reviews