Picture of CNMG433EN-F50CTCP115 Ceratizit CNMG120412EN-F50CTCP115 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

CNMG433EN-F50CTCP115 Ceratizit CNMG120412EN-F50CTCP115 80.0° Negative Carbide 0.4700 11.94mm Radius Medium, Semi Finishing

Part Number: CER12065872

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001513
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating grade CTCP115. 80.0 degree medium radius semi finishing tool. Made in Usa: No. Shipping state: MICHIGAN.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120412EN-F50CTCP115 80.0° Turning Insert TiCN + Al2O3 CNMG120412EN-F50CTCP115 CNMG433EN-F50CTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Ceratizit CNMG433EN-F50CTCP115 is a carbide turning insert for semi finishing. It has an 80.0° angle and 11.94mm radius. Used for medium cutting operations with TiCN and Al2O3 coating.

Composition

Carbide, TiCN, Al2O3, Grade CTCP115. Medium, semi finishing insert with 80.0° angle and 11.94mm radius.

Typical Uses

Semi finishing on turning operations. Used with 80.0° angle and 11.94mm radius. Suitable for medium cutting with TiCN and Al2O3 coating.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.4700 11.94MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews