Picture of CNMG432EN-TMQCTCP115 Ceratizit CNMG120408EN-TMQCTCP115 80.0° Negative Carbide 0.0310 0.79mm Radius Medium, Semi Finishing

CNMG432EN-TMQCTCP115 Ceratizit CNMG120408EN-TMQCTCP115 80.0° Negative Carbide 0.0310 0.79mm Radius Medium, Semi Finishing

Part Number: CER11844672

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001507
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating. 80.0 degree medium radius semi finishing. 0.79mm radius. Grade CTCP115.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120408EN-TMQCTCP115 80.0° Turning Insert TiCN + Al2O3 CNMG120408EN-TMQCTCP115 CNMG432EN-TMQCTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for semi finishing on turning operations. Features 80.0° negative carbide geometry. Suitable for medium cutting with TiCN + Al2O3 coating.

Composition

Carbide grade CTCP115 with TiCN + Al2-03 coating. Made from CNMG432EN-TMQCTCP115 and CNMG120408EN-TMQCTCP115. Radius 0.79mm.

Typical Uses

Semi finishing on turning operations. Applied to cylindrical parts. Used with medium cutting conditions.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews