Picture of CNMG432EN-TFQCTCP115 Ceratizit CNMG120408EN-TFQCTCP115 80.0° Negative Carbide 0.0310 0.79mm Radius Medium, Semi Finishing

CNMG432EN-TFQCTCP115 Ceratizit CNMG120408EN-TFQCTCP115 80.0° Negative Carbide 0.0310 0.79mm Radius Medium, Semi Finishing

Part Number: CER11695594

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001504
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating, CTCP115 grade, 0.0310 inch, 0.79mm radius, negative 80.0 degree, semi finishing. Made in USA: No. Shipping state: MICHIGAN. Brand: CERATIZIT.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120408EN-TFQCTCP115 80.0° Turning Insert TiCN + Al2O3 CNMG120408EN-TFQCTCP115 CNMG432EN-TFQCTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for semi finishing on turning operations. Features 80.0° negative carbide geometry. Provides medium radius of 0.79mm.

Composition

Carbide with TiCN + Al2O3 coating. Grade CTCP115. Medium radius insert.

Typical Uses

Semi finishing on turning. Applied to cylindrical surfaces. Used in machining operations with medium radius.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews