Picture of CNMG432A-N60 Ceratizit CNMG120408A-N60 80.0° Negative Carbide 0.0310 0.79mm Radius Medium, Semi Finishing

CNMG432A-N60 Ceratizit CNMG120408A-N60 80.0° Negative Carbide 0.0310 0.79mm Radius Medium, Semi Finishing

Part Number: CER11393430

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001606
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert uncoated N60 grade 80 degree negative carbide 0.0310 inch radius medium semi finishing. CNMG120408A-N60 CNMG432A-N60 turning insert uncoated N60 grade 80 degree negative carbide. CERATIZIT CNMG120408A-N60 80.0° turning insert uncoated CNMG120408A-N60 CNMG432A-N60. Made in Usa: No, Shipping State: MICHIGAN.

Key Details

Materials & Finish

  • Grade: N60

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120408A-N60 80.0° Turning Insert Uncoated CNMG120408A-N60 CNMG432A-N60

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for semi finishing on turning operations. Features 80.0° negative carbide geometry. Provides medium radius of 0.0310 inches (0.79mm).

Composition

Carbide grade N60. Uncoated insert. Medium radius. Negative carbide composition.

Typical Uses

Semi finishing on turning. Applied in turning operations. Used with CNMG432A-N60 or CNMG120408A-N60.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0310 0.79MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade N60
Insert Fits 80.0°
Only registered users can write reviews