Picture of CNMG431EN-M50CTCP135 Ceratizit CNMG120404EN-M50CTCP135 80.0° Negative Carbide 0.0160 0.41mm Radius Medium, Semi Finishing

CNMG431EN-M50CTCP135 Ceratizit CNMG120404EN-M50CTCP135 80.0° Negative Carbide 0.0160 0.41mm Radius Medium, Semi Finishing

Part Number: CER11958805

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001468
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating. 80.0 degree negative carbide, 0.0160, 0.41mm radius. Medium semi finishing. Grade CTCP135.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP135

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120404EN-M50CTCP135 80.0° Turning Insert TiCN + Al2O3 CNMG120404EN-M50CTCP135 CNMG431EN-M50CTCP135

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for semi finishing on turning operations. Features 80.0° negative carbide angle. Designed for medium radius with 0.0160 inch (0.41mm) tip radius.

Composition

Carbide grade CTCP135 with TiCN and Al2O3 coating.

Typical Uses

Semi finishing on turning operations with medium radius insert.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0160 0.41MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP135
Insert Fits 80.0°
Only registered users can write reviews