Picture of CNMG431EN-M34CTP5110 Ceratizit CNMG120404EN-M34CTP5110 80.0° Negative Carbide 0.0160 0.41mm Radius Medium, Semi Finishing

CNMG431EN-M34CTP5110 Ceratizit CNMG120404EN-M34CTP5110 80.0° Negative Carbide 0.0160 0.41mm Radius Medium, Semi Finishing

Part Number: CER11533845

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001460
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiAlN coating grade CTP5110. 80 degree medium radius semi finishing tool. Made in Usa: No. Shipping state: MICHIGAN.

Key Details

Materials & Finish

  • Coating: TiAlN
  • Grade: CTP5110

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120404EN-M34CTP5110 80.0° Turning Insert TiAlN CNMG120404EN-M34CTP5110 CNMG431EN-M34CTP5110

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for turning with 80.0° negative angle. Performs semi finishing with 0.41mm radius. Made for medium cutting conditions.

Composition

Ceratizit CNMG431EN-M34CTP5110 with TiAlN coating. Grade CTP5110. Medium insert with 0.0160 inch radius.

Typical Uses

Semi finishing on turning operations. Applied in cutting with 80.0° negative carbide insert. Used in medium cutting tasks with TiAlN coating.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiAlN
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0160 0.41MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTP5110
Insert Fits 80.0°
Only registered users can write reviews