Picture of CNMG431EN-F50CTCP115 Ceratizit CNMG120404EN-F50CTCP115 80.0° Negative Carbide 0.0160 0.41mm Radius Medium, Semi Finishing

CNMG431EN-F50CTCP115 Ceratizit CNMG120404EN-F50CTCP115 80.0° Negative Carbide 0.0160 0.41mm Radius Medium, Semi Finishing

Part Number: CER11912529

Need Assistance or Service? Please call 262-251-4020

Manufacturer: CERATIZIT
SKU: 1001457
Vendor: Sussex Tool and Supply
$0.00
This product has a minimum quantity of 10

CERATIZIT turning insert with TiCN and Al2O3 coating, 80.0 degree medium radius, semi finishing grade CTCP115. Made in USA: No. Shipping state: MICHIGAN. Brand: CERATIZIT.

Key Details

Materials & Finish

  • Coating: TiCN + Al2O3
  • Grade: CTCP115

Grades & Coatings

  • Alternate Description: CERATIZIT CNMG120404EN-F50CTCP115 80.0° Turning Insert TiCN + Al2O3 CNMG120404EN-F50CTCP115 CNMG431EN-F50CTCP115

Other Details

  • Brand: CERATIZIT
  • Shipping State: MICHIGAN
  • Made In Usa: No

Technical Overview

What It Does

Used for turning with semi finishing. Has 80.0° negative angle. Works with TiCN + Al2O3 coating.

Composition

CNMG431EN-F50CTCP115 with TiCN + Al2O3 coating. Grade CTCP115. Medium radius 0.41mm.

Typical Uses

Semi finishing on turning operations. Applied in turning with 80.0° negative carbide insert.

Products specifications
Attribute name Attribute value
Shipping State MICHIGAN
Cutter Type Insert
Made In USA No
Cutting Edge Definition Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Cutting Edge Material Carbide
Coating TiCN + Al2O3
Insert Or Tool Insert
Insert Application Medium, Semi Finishing
Corner Radius 0.0160 0.41MM
Insert Style CN
Insert Shape Or Cutter Pocket Shape 80.0°
Insert Type Negative
Insert Size (IC) 12 "43"
Grade CTCP115
Insert Fits 80.0°
Only registered users can write reviews