Picture of CNMG322-TF IC8150 Iscar CNMG090308-TF IC8150 80.0° Negative Carbide 0.0310 0.79mm Radius Roughing, Semi Finishing

CNMG322-TF IC8150 Iscar CNMG090308-TF IC8150 80.0° Negative Carbide 0.0310 0.79mm Radius Roughing, Semi Finishing

Part Number: ISC5509271

Need Assistance or Service? Please call 262-251-4020

Manufacturer: ISCAR
SKU: 1051557
Vendor: Sussex Tool and Supply
$12.70
This product has a minimum quantity of 10
Cemented carbides are a class of hard materials used extensively for cutting tools, as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance.
Products specifications
Attribute name Attribute value
Insert Application Roughing, Semi Finishing
Cutter Type Insert
Insert Size (IC) 09 "32"
Insert Type Negative
Cutting Edge Definition or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites. The cobalt content could vary from 5% to 23% base on application. 8% to 12% are the most common for cutting tools. Ruthenium is used to replace cobalt as a perfered binder for the best cutting performance., as well as in other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), Cemented carbides are a class of hard materials used extensively for cutting tools
Insert Style CN
Grade IC8150
Insert Or Tool INSERT
Insert Shape Or Cutter Pocket Shape 80.0°
Shipping State TEXAS
Cutting Edge Material Carbide
Insert Fits 80.0°
Coating TiCN + Al2O3 + TiCN + TiN
Corner Radius 0.0310 0.79MM
Made In USA No
Only registered users can write reviews